Smart Home Switches Electrical Products


DFS 2 / 4 RCCB This very modern range of residual current circuit breakers has many technical improvements over previous models. We have incorporated a new latch mechanism as well as new tripping and transformer technology. The device has a contact position indicator, in addition to a reset position, which shows whether the device has been switched off manually or tripped due to a fault. The devices accept both pin and fork busbar, the pin terminal having a maximum cross-section of 50mm. The RCD has a facility to accept a circuit identification label behind a clear plastic window. The two and four pole ranges extend to 125 amps in all the standard sensitivity settings. The range includes many variants such as time delay, surge resistant and pulsating DC. All our RCDs have been manufactured to BSEN 61008.
	New generation Miniature Circuit Breakers DLS6 are setting the standard in tripping technology. Magnetic tripping mechanisms create heat, which consumes power. We have dissipated the heat efficiently and thereby reduced long term energy use. The new style din rail clip enables the MCB’s to be removed easily and quickly from the din rail without the need to remove the busbar from the remaining fixed modular devices. The MCBs accept both pin and fork busbar, the tube terminals have a capacity of 25mm.
The Doepke range of Modular Devices includes isolators, time switches, contactors & bell transformers. All these devices are housed in enclosures which are multiples of the standard 17.5mm wide module and can be fixed easily to the standard DIN rail. Isolators are available in 2, 3 & 4 modules, timers are either electro-mechanical or electronic and contactors range from 20 to 63A ratings with various contact configurations